Service Adjustments
-10-
1) To enter to the Service Mode
Press and hold the
GREEN button
on the remote control and then press the
Programme down button
(
CH
▼
) on
the front panel of the TV.
Press the
Programme down button
to select the mode required (Regular, Image, others and TB12**). Then press
the
F/OK button
to select the mode.
The available adjustment items are as follows;
Image
:This can be adjusted for picture image/Shapes.
Regular
:This can be adjusted for the service adjustment.
Other
:This is for the factory setting.
DO NOT ADJUST
.
TB1251
:This is for the factory setting.
DO NOT ADJUST
.
2) To select the mode and service item and change data value
Select the desired adjustment mode by pressing the
Programme down
or
up button
and press the
F/OK button
.
To select the adjustment item, use the
Programme down
or
up button
.
To change the service data, use the
Level up
or
down button
.
The data which is set in the service mode is stored into the memory IC automatically.
Regular
01 AGC 38
Image
01 P V-P 24
REGULAR mode
IMAGE mode
3) Exit from the Service Mode
Press the
Programme information call button
or turn off the TV set by using the mains switch.
Initialisation of Memory IC (IC803)
To initialise the memory IC (IC803), press and hold the
Picture mode selection (
→•←)
button
on the remote
control, then press the
Programme down button
on the front panel of the TV set and then turn the Mains switch
off and on. The initialisation is now completed.
When initialised the memory IC and all of the setting data (option data and service adjustment data) stored in the IC
are reset to the default value. It is necessary to set the option settings and readjust the service adjustments listed
on page 9 and to re-tune all the channels.
Adjustment Data
Adjustment No.
and Item name
Adjustment Data
Adjustment No.
and Item name
