C a l l e r I D [ E 6 3 ]
CALLER ID
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone number and
name of the party on the Caller ID list can be stored in memory.
1) When the phone is in standby mode, view the Caller ID message to be stored.
Then press
/select
.
S to r e/ Ed i t N am e
appears.
2) To complete the setting, follow the steps 3-8 in "Storing Phone Numbers, Names,
Distinctive Rings, and Speed dial" on page E49-E50.
Notes:
• If a call comes in via a telephone system that does not offer Caller ID service, no
information is stored.
• If the Caller ID message was received as a private/unknown number, or the message does not
have the number, you cannot store the message in the Phonebook. If it was received as
private/unknown name, the message will be stored as <No Name>.
• Even if the 100 memory locations are full, the message will be stored in the Phonebook.
However, the message will be erased from the Caller ID list.
UP383BA_0.book Page 63 Thursday, May 26, 2005 10:48 AM
