E9
Ren Number: 0.4
The Ringer Equivalence Number (REN) assigned to
each terminal device provides an indication of the
maximum number of terminals allowed to be
connected to a telephone interface. The termination
on an interface may consist of any combination of
devices subject only to the requirement that the sum
of the Ringer Equivalence Numbers of all the devices
does not exceed 5.
CAUTION
This Product is intended for use in CANADA only.
Sale or use in other countries may violate local laws.
Cordless telephones use radio frequencies to allow
mobility. This affects the performance of your unit.
1. NOISE
Electrical pulse noise is present in most homes at one
time or another. This is most intense during electrical
storms. Certain kinds of electrical equipment, such as
light dimmers, fluorescent bulbs, motors, fans, etc.,
also generate pulse noise.
Because radio frequencies are susceptible to this, you
may on occasion hear pulse noise through the
handset. This is usually only a minor annoyance and
should not be interpreted as a defect of the unit.
2. RANGE
Because radio frequencies are used, the location of
the base station can affect the operating range of the
unit. Try several locations and choose the one that
gives the clearest signal to the handset. (Turning in a
circle while holding the handset may also increase
the operating range.)
3. INTERFERENCE
Electronic circuits activate a relay to connect the unit
to your telephone line. These electronic circuits
operate in the radio frequency spectrum. While
several protection circuits are used to prevent
unwanted signals, there may be periods when these
unwanted signals enter the base station. You may
hear click or hear the relay activate when you are not
using the cordless handset. If this occurs frequently,
you can minimize or eliminate the problem by
lowering the height of the base station or relocating
the base station. It may also be helpful to change the
operating channel and/or the security code setting.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of
the device.
NOTICE:
Privacy of communications may not be ensured
when using this telephone. Other devices, including
other cordless telephone telephones, may interfere
with the operation of this cordless telephone or cause
noise during operation. Units without coded access
may be accessed by other radio communication
systems. Cordless telephones must not cause
interference to any licensed radio service.
The Industry Canada Label identifies certified
equipment. This certification means that the
equipment meets certain telecommunications
network protective, operational and safety
requirements. The ministry does not guarantee that
the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure
that it is permissible to be connected to the facilities
of the local telecommunications company. The
equipment must also be installed using an acceptable
method of construction.
In some cases, the company’s inside wiring
associated with single-line individual service may be
extended by means of a certified connector assembly
(telephone extension cord). The customer should be
aware that compliance with the above conditions
may not prevent degradation of service in some
situations.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated
buy the supplier. Any repairs or alterations made by
the user to this equipment, or equipment
malfunctions, may give the telecommunications
company cause to request that the user disconnect
the equipment.
The user should ensure for his own protection that
the electrical ground connections of the power utility,
telephone lines and internal metallic water pipe
system, if present, are connected together. This
precaution may be particularly important in rural
areas.
CAUTION
Users should not attempt to make such connections
themselves, but should contact the appropriate
electrical inspection authority, or electrician, as
appropriate.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the product.
This symbol on the product is used to identify the
following important information. Use only with
specified SANYO power adaptor.
Technical Information
CLT9902 #4 (SANYO) 8/11/00 4:14 PM Page 10