Sanyo CLT-2430 Скачать руководство пользователя страница 52

Страница: 52 / 60

E48

The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary.

The first time you charge your handset, the security code is automatically set.
(See page E2.)

In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.

Remove the handset from the base unit. Press
and hold

INTERCOM/PAGE/FIND

While holding

INTERCOM/PAGE/FIND

, return

the handset on the base unit. The paging stops.
Leave the handset on the base more than 5
seconds.
A new security code is set.

ADDITIONAL

INFORMATION

If the handset battery pack is completely discharged or the battery pack is removed, the
digital security code will be lost. If this happens, a new security code is set automatically
the next time the battery pack is charged.

Note:

Changing the digital security code

Your CLT-2430 is pre-programmed with 8 call waiting options.

No.

Option

Message

Switch/FLASH

Press

CID/FLASH

to switch callers

Ask to Hold

Pre-recorded message asks 2nd caller to hold

Tell Busy

Pre-recorded message tells 2nd caller you are busy

Take Message

Asks 2nd caller to leave a voice message

Answer/Drop first

Disconnects the 1st caller and answers the 2nd

Conference

Starts a 3-way conference call with both callers

Drop first

Disconnects 1st caller

Drop Last

Disconnects 2nd caller

Check with your local telephone company for a full list of options.

CLT2430 5th 8/9 8/10/00 4:29 PM Page 52

Содержание CLT-2430




























































Результаты поиска

Содержание CLT-2430

Отзывы:

Бренды по названию

Популярные бренды

Sanyo CLT-2430, Инструкция по эксплуатации

Результаты поиска

Содержание CLT-2430

Отзывы:

Бренды по названию

Популярные бренды