Sanyo CES26WSD7-B, Инструкция по эксплуатации

Страница: 7 / 30

English
- 6 -
Initial Settings
When the TV is turned on for the first time, it is in the
digital mode.
Because this is the first time the TV is used, there are no
channels stored in the memory and the following message
appears on the screen.
Please ensure a erial is plugged in. Do you
want to start first tim e installation?
Yes No
• To start installation process, select
“Yes”,
to cancel
select
“No”.
• To select an option
“Yes
or
No”,
highlight the item by
using or buttons and press the “
SELECT
” button.
The IDTV will automatically tune to the UHF transmision
channels 21 to 68 looking for digital terrestrial TV broad-
casts and displaying the names of channels found.
This process will take about five minutes. To cancel
searching, you can press the
"M"
button at any time
during the process.
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searc hing UHF c hannels 30. Please wait. This will take a few minutes
Canc el searching
AUTOMATIC SEARCH
Channels:
12 %
After
Automatic Search
process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TV mode.
Yes
Do you want to searc h for
analogue c hannels?
No
To seach for analogue channels, select
“Yes”
. The
menu below is displayed to search for analogue chan-
nels.
Country
Language
Germany
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO PROGRAMMING SYSTEM
TXT Language
By pressing “ ” or “ ” button, adjust the
Country
item and press “

” to highlight
“Language”
item.
Use “ ” or “ ” button to set
“Language”
. Use “ ”
or “ ” buttons to select
“TXT Language”
and set it
by using ” or “ ” buttons. Press
“OK”
button to
continue:
UK
P 03 - C 04
63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After
APS
is finalized, a programme list will appear on
the screen. In the programme list you will see the
programme numbers and names assigned to the
programmes.
If you do not accept the locations and / or the programme
names of programmes, you can change them in Insall
Menu. For details see
“Install Menu”
section.
To display channel list in IDTV, switch to the IDTV via
pressing the
“
TV DTV
”
button. Then press the
"M"
button to enter main menu,
Channel List
will be high-
lighted. Press the
“SELECT”
button to enter the menu.
ENG-32781W-1050UK-32 INCH 17MB22 UK IDTV-(2 HDMI-WO PIP-SPDIF)-50104961.p65 04.04.2007, 16:59 6