Sanyo CE42LM5WP, Инструкция по эксплуатации

Страница: 11 / 68

11
Common specification
Power source 100~240V 50Hz / 60Hz
Colour system PAL NTSC3.5 ,SECAM
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to
pin 14) and audio-L/R
Output: composite video and audio L/R
AV2: BNC
Input: RGB, H and V / Y, Pb, Pr and audio L/R
Output: RGB, H and V / Y, Pb, Pr
AV3: BNC
Input: Composite video
Output : Composite video
Audio Monitor.Out: CINCH L/R
Audio Speaker out: 2 x 6W
DVI Input : DVI-D GROUP Standard
PC Input: Mini D-SUB 15 PIN and
Audio 3.5mm Jack
Serial port: RS232C: Input / Output
Net Organiser: POA-LN01 (optional)
When ordering these products, give the Name and Type No. to the
sales dealer.
Contrast Ratio 1500:1
Screen(inches/ cm) 42” / 107 cm
(viewing measured
diagonally)
Display Native Resolution 1366 x 768 (WXGA)
Viewing angles H:178°, V:178°
Dimensions (WxHxDmm) 1027x620x167.5
Weight (kg) 40.7
■
NO PICTURE, NO SOUND
●
Check if monitor is plugged in.
●
Check monitor is not in standby mode
■
POOR PICTURE, SOUND OK
●
Adjust BRIGHTNESS/ CONTRAST LEVELS (too low).
■
NO COLOUR, PICTURE OK
●
Adjust COLOUR control.
●
Check lead connections
●
Does the signal input have colour
■
REMOTE CONTROL DOES NOT WORK
●
Check batteries are inserted correctly
●
Check condition of batteries
●
Check to see if remote control inhibit is set ON
■
PICTURE OK, NO SOUND
●
Check external speakers are connected correctly
●
Check lead connections to external equipment
●
Volume turned down or mute selected
SPECIFICA SPECIFICA TIONS / HELPFUL TIONS / HELPFUL HINTS HINTS
GB GB
Specification
Helpful hints