UK5 Specification of expanding serial command
10. Specification Command with Address
Ver. Rev.A
Page
51
10. 2. 2 Sequential execution functions
The function needed sequential command, the same control as remote control Receiving.
That is
1. Sending command every in 100
second
2. Receiving a command, execute function sequentially within 120
s.
3. Receiving the same command in 120
second, then execute sequentially in 120
s from that time.
4. If there is no command receiving any more, the command execution is stopped.
5. If any other command is received within 120 m seconds, the sequential command is stopped.
10. 3 Status read command with address
10. 3. 1 Format
Issuing following command from PC
“A” Address “CR” Command [CR]
or
“A” Address “CF_” Command [CR]
Address
3 digit from “
”
“
”
The monitor decodes then return requested data only when the receiving data including address existing.
Requested data [CR]
Requested data
Line of character
When the receiving data is not readable,
“
”
CR
is returned.
