Wiring
General
Ground
Accessory/Ignition
UP)
4
Constant power supply
!j Power antenna control
,
4-Speaker system
,
2-Speaker system
F r o n t L e f t
Speaker
Front Left
Speaker
Front Right
Speaker
Front Right
Speaker
R e a r
Speaker
1. Antenna socket
Insert the DIN Antenna plug installed in your vehicle into this socket.
2. Ground wire (Black)
Connect this wire to the vehicle chassis.
3. +
Accessory/Ignition wire (Red)
Connect this wire to
a
terminal that receives power while the ignition switch is ON
or in the Accessory (ACC) position.
Never connect the wire to the car battery directly or the car battery may be
drained.
Note:
the vehicle does not have an ACC terminal, connect this wire to a terminal which
receives
power while the ignition switch is On, and stands 4A or more of elec-
tric current.
4. + 12V Constant power supply wire (Yellow)
Connect this wire to + 12V power terminal that receives power continuously, and
stands 4A or more of electric current .
Note:
Both of the +
Accessory/Ignition wire (Red) and the +
Constant power
wire (Yellow) should be connected
to their
respective
terminals
to operate
the unit.
5. Power antenna control wire (Blue)
Connect this wire to the control terminal of Power antenna. When not using a
Power antenna, this wire is not used.
22
