more than 500MS then minute or hour will be added by one after each
160MS.
The cycle period of hour is 24 hours and that of minute is 60 minutes. When
the hour is set to 23, press VOL- button again will clear the time setting.
Press once again will start from 0 again.
If OFF-TIME is set the setting of SLEEP will be cancelled. Press POWER
button to set POWER OFF mode, the setting of OFF-TIME will be
cancelled automatically.
When setting time of ON-TIME comes and starts up the TV, SLEEP will be set
to 120m automatically in case there is nobody at home to turn off the TV
after its automatic start-up. Any operation after automatic start-up can
cancel the setting of SLEEP automatically.
If POSITION is set the desired position will be entered into upon start-up at
the on-time or preset time.
If timer function is selected, the program on the "preset position" will start
automatically at the preset time.
If attention timer is set, "ATTENTION" in big red letters will be seen flashing
on the screen at the preset time until any button is pressed. During flashing
for attention, it is in automatic mute mode. If the output function of
ALARM port is selected, alarming will be heard.
If no operation is performed in ten minutes, the CLOCK menu will quit
automatically.
3
)
. OSD display
TIME
CLOCK - - : - -
OFF-TIME - - : - -
ON-TIME - - : - -
ATTENTION
ATTENTION - - : - -
BESPOKE-TIME - - : - -
BESPOKE POSITION -
About 10 seconds
note: flash for attention
4-16. SYSTEM (remote control unit)
1). Function: enter into SYSTEM menu.
