-9-
On-screen Service Menu System
General
This set has an On-screen Menu system included in the CPU that allows remote operation for most of the
service adjustments.
r
How to select the service item and adjust data:
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
r
How to enter the Service Menu
1.
Press the
INPUT
button on Side Controls or on
the remote control.
2.
Press the numeric buttons "2", "5", "8", "0"
orderly on the remote control, and the Service
Mode will be displayed.
With the menu, press ▲, ▼, ◄
or
►
button to
navigate through the options or adjust an option.
Press
ENTER
button to confirm a selection or enter
a sub-menu.
Press
BACK
button to return to previous layer
menu.
r
To exit service mode
Press
MENU
button to exit service mode.
Open the Input Source Menu.
INPUT button
Remote Control
[ Service Mode Menu ]
BACK button:
Return to previous
layer menu
◄►
button:
Adjust the data
▲▼
button:
Select Item
MENU button:
Exit Service Mode
Side Controls
ADC ADJUST
Service Mode
PICTURE MODE
W/B ADJUST
SPECIAL SET
QMAP ADJUST
SW INFORMATION
Backlight Adjust
Over Scan
Software Upgrade
BMTEST
Audio Preset Setting
W/B DATA
ET2 VER 1.83 SANYO_32FHD 2011/3/7