manualshive.com logo in svg

Sanyo 1 122 280 00, Руководство по обслуживанию, Страница: 37 / 96

Поделиться
Скачать
Sanyo 1 122 280 00 Скачать руководство пользователя страница 37

-37-

Indicators and Projector Condition

■

Troubleshooting

Check the indicators for projector condition.

• • • lights green.

• • • lights red.

• • • off

• • • flashes green.

✽

When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When

this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace
counter after replacement of the lamp.

The projector is OFF. (The AC power cord is unplugged.)

The projector is preparing for stand-by or the projection lamp is being
cooled down. The projector cannot be turned on until cooling is completed.

The temperature inside the projector is abnormally high. The projector  can-
not be turned on. When the projector is cooled down enough and the  tem-
perature returns to normal, the POWER indicator lights red and the  projec-
tor can be turned on. (The WARNING . indicator keeps flashing.)  Check and
clean the Air filter.

Projector Condition

The projector is ready to be turned on with the POWER ON-OFF button.

POWER

red/green

Indicators

LAMP

REPLACE

yellow

WARNING 

red

The projector detects an abnormal condition and cannot be turned on.
Unplug the AC power cord and plug it again to turn on the projector. If the
projector is turned off again, disconnect the AC power cord and contact the
dealer or the service center for service and checkup. Do not leave the pro-
jector on. It may cause electric shock or a fire hazard.

✽

✽

✽

✽

✽

The projector is operating normally.

The projector is in the Power management mode.

✽

✽

The projector has been cooled down enough and the temperature returns to
normal. When turning on the projector, the WARNING  indicator stops flash-
ing. Check and clean the air filters.

• • • flashes red.

Содержание 1 122 280 00

































































































Отзывы:

Нет отзывов