7
SANWAY AUDIO
http://www.china-sanway.com
http://www.china-sanway.com
Stereo
Mode
Before setting the mode, please turn off the amplifier and slide the
mode select switch to below (Picture 1). In this mode, Channel 1
an Channel 2 operate independently (Just traditional stereo
amplifier). The signal input into channel 1 can be output from
channel 1 only, similarly, the signal input into channel 2 can be
output from channel 2 only. The many channels, one by one in
order type pushes.
(
Picture1
)
Bridge
Mode
Before setting the mode, please turn off the amplifier and slide the
mode select switch to above (Picture 2), channel 1 and channel 2
are bridged, channel 3 and channel 4 are bridged. At time, the
signal input into channel 1 and channel 3 will be output from the
bridge end. On other hand, the output level control of channel 2
and channel 4 should be turn down to smallest. Only the volume
control of channel 1 and channel 3 are used to control the volume
of whole system.
(
Picture2
)
