Sanwa PC720M, Инструкция по эксплуатации

Страница: 13 / 80

― 10 ―
・
「Temp」
：
[ C ]
⇔
[ F ] ( C:
℃
, F:
o
F)
・
「 」
：
[ ]
⇔
[ ]
・
「 」
：
[ (m) ]
⇒
[ (m) / ( m) ]
⇒
[ (m) / (m) ]
⇒
[ (m) /Hz]
⇒
[ (m) ]
⇒
…
・
「 」
：
[ μ ]
⇒
[ μ /μ ]
⇒
[ μ /μ ]
⇒
[ μ /Hz ]
⇒
[ μ ]
⇒
…
At the Temp position, press REANGE HOLD button (
⇒
) to select what
the display shows on the temperature measurement as follows.
[T1]
⇒
[T2]
⇒
[T1+T2]
⇒
[T1-T2 + T2]
⇒
[T1]
⇒
…
Note:
The last selection of each function will be saved as power up
default for repeat measurement convenience.
(Except function)
4-5 Range Hold
Press the RANGE HOLD button to select manual-ranging, and the
meter will remain in the range it was in. (
turns off.) In
the manual-ranging mode, press the button again to step through
the ranges. Select an appropriate range making sure units and
decimal point positions. To resume auto-ranging mode, press and
hold the button for 1 second or more.
Note:
Manual ranging mode is not available in the Hz functions.
4-6 Data Hold
Press HOLD button to freeze present reading for later view. (
indicator turns on.) Input fluctuation will not reflect on the indicated
value. Press the HOLD button again to disable the data hold
feature and go back to the normal measurement mode. (
indicator turns off.)
Note:
Function changes or functional operations will cancel the data hold
feature.