5
Instruction Manual for QUATTRO
1-888-726-8869
www.sanuvox.com
2. Ultraviolet light may damage plastic or exposed wiring (Sanuvox
wire set is teflon coated which is resistant to UV exposure).
If any plastic or wiring is exposed to direct UV exposure, wrap exposed
material(s) with aluminum tape or metal conduit.
4. Adjust the UV lamp assembly so it will be positioned in the middle of
the duct. The arms that support the lamp assembly have an adjustable
clutch which allows the lamp and extrusion to be set at a distance from
10" to 15" from the backplate
To adjust the assembly, loosen the clutch by turning it counter-
clockwise. Rotate the clutch clockwise to tighten. The lamps and
extrusion can then be positioned to the desired distance from the
backplate.
STEP 2
STEP 4
Extends Assembly
5. Place the QUATTRO in the duct opening in the correct position. Screw
unit in place on duct with the 12 self tapping sheet screws provided.
STEP 5
3. Cut a opening in the duct. The opening should have the following
dimensions: 22" x 5.5".
STEP 3
5.5"
22"
6. Plug the power cord into the wall outlet. If the module is connected to
a switch, make sure the switch is turned on.
You are now ready to enjoy
superior indoor air quality.
STEP 6
