SANUSLIFE ECAIA S, Руководство по эксплуатации

Страница: 12 / 14

13 12
4.5
Operation of ECAIA ionizer S faucet
The device can be switched on and off using the power button (D-D1).
The button “ALK” for alkaline levels (D-D2) allows you to switch between
alkaline levels 1, 2, 3, 4 and 5. To do this, read the instructions under point
“1.12 - Description of the buttons” in the full user manual (long version) for
the ECAIA ionizer S.
By pressing and holding the ALK button (D-D2) for more than 5 seconds, you
can set the ionization output for the selected alkaline level. To do this, read
the instructions under point “1.14 - Setting ionization output” in the full user
manual (long version) for the ECAIA ionizer S.
The button “ACID” for acidic levels (D-D3) allows you to switch between
acidic levels 1 and 2. To do this, read the instructions under point “1.12 - De-
scription of the buttons” in the full user manual (long version) for the ECAIA
ionizer S.
By pressing and holding the ACID button (D-D3) for more than 5 seconds,
you can set the ionization output for the selected acid level. To do this, read
the instructions under point “1.14 - Setting ionization output” in the full user
manual (long version) for the ECAIA ionizer S.
By pressing the button “PU” (D-D4), only filtered water is produced.
To do this, read the instructions under point “1.12 - Description of the but-
tons” in the full user manual (long version) for the ECAIA ionizer S.
6. Plug the power cable of the ECAIA ionizer S+ into the socket. You can now use the
ECAIA ionizer S+ again using the control panel (B-1) on the ECAIA ionizer S+.