5
4
Please check the parts listed below (B - F), which are included
in the scope of delivery:
Optional filter cartridges available as accessories:
2
Delivery Contents of ECAIA carafe S
Available to order
ECAIA glass jug S
Glass carafe incl. “e-
smog protected plate”
from memon® (availa-
ble to order)
1 x ECAIA container S
Additional container
incl. lid with filter indi-
cator
1 x ECAIA tank S
Tank container for on
the go
1 x filter hook
To remove the filter
2 x ECAIA main filter S
Main cartridge
User Manual
(Short version)
A
B
C
D
E
F
ECAIA nitrate filter S
Nitrate cartridge
(Product under development)
H
3
Clean before use
4
Filter activation and filter installation
Wash the additional container with lid and the tank container by hand. Use warm tap water,
possibly with the addition of a gentle cleaning product. Do not use rough cleaning utensils to
avoid scratching the surface.
It is NOT recommended to put the parts in the dishwasher. This could negatively affect both
the surfaces and the product quality in general.
Note
: Please note that
ECAIA carafe S
is suitable for treating drinking water only.
There are three (3) different filter cartridges for the ECAIA carafe S:
• ECAIA main filter S
(main cartridge) (2-E)
• ECAIA nitrate filter S
(nitrate cartridge) (2-F)
• ECAIA booster filter S
(additional ionization cartridge) (2-G)
The
ECAIA main filter S
(2-E) is essential for the proper functioning of the
ECAIA carafe S
. The
other two cartridges are optional and can be attached to the main cartridge as needed.
To activate the individual cartridges, remove them from the packaging and immerse
them completely in water for one (1) minute. Additional shaking flushes out any dust
residues or particles of the filter medium. At the same time, the filter medium is comple-
tely soaked and activated.
If necessary, use the additional cartridge
ECAIA booster
filter S
(2-G) by mounting it on the bottom of the main car-
tridge
ECAIA main filter S
(2-E) by turning it clockwise. Make
sure that the seals are inserted correctly.
4.1
Step 1: Activation of the filter cartridges
4.2
Step 2: Installation of additional cartridge ECAIA booster filter S
(optional)
ECAIA booster filter S
Additional ionization cartridge for
stronger ionization.
G