IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
CAUTION:
Avoid potential personal injuries and property damage!
●
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
●
Do not use this product for any purpose not explicitly specified by manufacturer.
●
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
●
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
customer service.
Tools Required
Tape Measure
Stud Finder
This product conforms to and should be properly grounded in compliance with requirements of the current National Electrical Code or
codes administered by local authorities.
All electrical products may present a possible shock or fire hazard if improperly installed or used. This product may bear the mark of a
Nationally Recognized Testing Laboratory and should be installed in conformance with current local and/or the National Electrical Code.
Pencil
Phillips Screwdriver
Slotted Screwdriver
Paint (optional)
Surfaces are paintable
to match your decor
WARNING:
This product contains small items that could be a choking hazard if
swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are
missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never
use damaged parts!
BEFORE DRILLING ANY HOLES:
Make sure your TV plug fits in the upper
module
02
and your soundbar fits in
soundbar module
03
.
STEP 1
v
Upper
Module
Lower
Module
Soundbar
Module
Cutting Template
Power Cord
Soundbar
Housing
Soundbar
Housing
Screw
Cover
Plate
Front Housing
Screw
Back Housing Screw
Cap
Front Plug
Housing
Back Plug
Housing
Drywall Saw
11
04
05
06
07
12
08
09
10
13
14
02
03
01
Cut Holes
Supplied Parts
TIP
: Drill the upper hole BEHIND your TV and the
middle hole BEHIND your soundbar.
MAX:
1 ⅛ in. (29 mm)
02
03
Outlet Height
TV
Soundbar
Up to 8 ft.
Up to 3 ½ ft.
Up to
6 ft.
1
2
3
LOCATE
TRACE
CUT
UPPER
(TV)
MODULE
LOWER
MODULE
MIDDLE (SOUNDBAR) MODULE
01
01
01
14
14
14
Model
WSIWPSB1-W1
OWNERS GUIDE
IN-WALL POWER KIT
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
800-359-5520
or, chat at
SANUS.com/chatSP
We’re ready to help!
This Cable Kit is designed to fit into both interior
and exterior walls constructed with:
Minimum Space into Wall:
3 in.
Minimum Drywall Thickness:
1/2 in.
(MAX: 1 in.)
No Fire Block Stud in the cavity *
NOTE:
The cable Pass-
Through Width is
1.75 inch.
Walls with blown-
in type insulation
may require
removal of some
insulation inside
the cavity.
Drywall
Stud
Back Wall
* A horizontal fire block stud requires a 1.75 inch hole to pass the power cord.
This requires removal, then repair of drywall, to gain access to that stud.
We recommend you consult a professional.
Verify Wall Compatibility
Verify TV Plug Fit
WARNING:
RISK OF FIRE AND SHOCK. Do not connect the module
02
to any other circuits or outlets.
CAUTION:
RISK OF FIRE AND SHOCK. ONLY intended for use on 15 ampere branch circuits.
CAUTION:
RISK OF FIRE AND SHOCK. Do not install power supply cord
13
within wall cavity.
Doc. #1507331 08/20 Rev A
