30
Opción de hormigón macizo o bloque de hormigón
PRECAUCIÓN:
Evite posibles lesiones personales y daños materiales.
●
Monte el conjunto de brazo/placa de pared
15
directamente sobre la superficie de hormigón
●
Grosor mínimo del hormigón macizo: 203 mm (8")
●
Tamaño mínimo del bloque de hormigón: 203 x 203 x 406 mm (8 x
8
x 16")
PASO 2B
ESPAÑOL
1. Localice un clavo/tornillo del montante utilizando el localizador de montantes magnético de Sanus
16
suministrado.
2. Localice los bordes del montante utilizando la sonda del localizador de montantes
16
.
3. Marque el centro del montante con un lápiz.
4. Coloque la plantilla de la placa de pared
14
a la altura que desee y posicione los orificios perforados sobre la línea central del montante.
Nivele la plantilla de la placa de pared
14
y péguela con cinta adhesiva en su posición.
NOTA:
Si necesita ayuda para determinar la posición de la placa de pared, consulte Height Finder en sanus.com.
IMPORTANTE
:
Asegúrese de hacer las marcas y taladrar en el centro del montante.
*
ADVERTENCIA
:
Este producto contiene un imán. Si está utilizando un dispositivo médico implantado como un marcapasos o un
desfibrilador cardioversor implantable (DCI), los campos magnéticos pueden afectar al funcionamiento de esos dispositivos y producir
lesiones graves o la muerte. Si tiene un dispositivo médico implantado, mantenga una distancia mínima de 13 cm (5") entre su dispositivo y
el imán. Consulte con un médico o un profesional sanitario antes de utilizar este producto.
5. Taladre los dos orificios guía utilizando una broca de 5,5 mm (7/32") de diámetro.
IMPORTANTE
:
Los orificios guía deben taladrarse hasta una profundidad de 75 mm (3").
6. Retire la plantilla de la placa de pared
14
. Apriete los pernos tirafondo
17
solo hasta que las arandelas
18
queden firmemente sujetas
contra la placa de pared
15
.
PRECAUCIÓN:
El uso incorrecto podría reducir la capacidad de sujeción del perno tirafondo. Para evitar posibles lesiones o daños
materiales, no apriete excesivamente los pernos tirafondo
17
.
Coloque las cubiertas
20
sobre los pernos tirafondo
17
.
Содержание VSF409
Страница 25: ...25 ...