Sanus VisionMount VML10, Инструкция по эксплуатации

Страница: 7 / 36

6901-002029 <06>
7
Solid Concrete or Concrete Block
3-1
Mark the wall
[01]
[01]
[04]
[03]
[05]
[05]
3 Wall Mounting
For assistance in determining wall plate location, see Height Finder at
sanus.com.
Level the wall plate
[01]
and mark the hole locations.
CAUTION:
Avoid potential injuries or property damage!
Ù
Mount the wall plate
[01]
directly onto the concrete surface.
Ù
Minimum solid concrete thickness: 8 in.
Ù
Minimum concrete block size: 8 x 8x 16 in.
002862.eps
002862.eps
75 mm
(3 in.)
[05]
3-2
Drill pilot holes
3-3
Insert anchors and lag bolts
CAUTION:
Avoid potential injuries or property damage! :
Ù
Pilot holes
MUST
be drilled to a depth of 75 mm (3 in.) using a 10
mm (3/8 in.) diameter drill bit.
Ù
Never drill into the mortar between blocks.
Insert lag bolt anchors
[05]
. Then insert lag bolts
[04]
using a drill and
the Allen Driver Bit [03] .
CAUTION:
Avoid potential injuries or property damage!
Improper use could reduce the holding power of the lag bolt. To
avoid potential injuries or property damage:
Ù
Be sure the anchors
[05]
seat flush with the concrete surface.
Ù
Tighten the lag bolts
[04]
only until the they are pulled firmly
against the wall plate [01] .
Ù
DO NOT over-tighten the lag bolts [04] .
10 mm
(3/8 in.)