9
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
06
.
IMPORTANT
: Be sure to drill into the center of the stud.
IMPORTANT
: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate
07
using two lag bolts
08
and two washers
09
. Tighten the lag bolts only until they are pulled firmly against the wall
plate.
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts
08
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
07
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
4
08
09
3
3 in.
(75 mm)
7/32 in.
(5.5 mm)
06
07
