Sanus HMT1, Инструкция по эксплуатации

Страница: 11 / 20

11
Solid Concrete or Concrete Block Option
4 3
*
*
3. Remove the wall plate template
06
and insert three (3) anchors
C3
(Fischer UX 10 x 60R - included in the Concrete Installation Kit * ).
CAUTION:
Be sure the anchors are seated flush with the concrete surface.
4. Install wall plate
07
using three (3) lag bolts
C1
and three (3) washers
C2
(use only the lag bolts and washers from the Concrete
Installation Kit * ). Tighten the lag bolts only until the washers are pulled firmly against the wall plate.
CAUTION:
Avoid potential personal injury or property damage! All three (3) lag bolts
C1
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
07
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
*
Contact Customer Service at 888-384-1115 to inquire about the Concrete Installation Kit CMK1.
07
C3
C1
C2