12
Adjustments
Your TV should adjust easily when moved, then stay in place.
Adjust the tilt tension knob
T
if your TV naturally tilts up or down.
T
If you do not intend to adjust the tilt for different viewing locations,
you can tighten the tilt tension knob
T
, to prevent unwanted
movement. If needed, use hex key
14
to tighten more firmly.
NOTE:
1. Loosen screw
12
.
2. Level your TV with screw
L
.
3. Tighten screw
12
.
12
14
12
14
L
14
LEVEL ADJUSTMENT
TILT ADJUSTMENT
1
2
3
CAUTION:
Screw
12
MUST be loosened before STEP 2.
TV LATERAL SHIFT
HEAVY
! You may need
assistance with this step.
1. Remove the TV (See PAGE 13).
2. Open cover strips
P
.
3. Loosen but
do not remove
, locking screws
S
.
4. Slide arm
11
to the desired position.
5. Tighten locking screws
S
.
CAUTION:
Avoid potential personal injury or
property damage! Always make sure both
locking screws
S
are tightened so the TV is securely fastened to wall plate
08
.
6. Close the cover strips
P
,then hang your TV (see STEP 3).
For wood stud applications ONLY:
CAUTION
:
Avoid potential injuries or property damage!
Do NOT adjust the arm position from center for concrete
applications.
Arm
11
MUST remain centered in wall plate
08
for all
concrete applications!
EXTEND / RETRACT -- ONLY IF NECESSARY
ONLY if needed, adjust the extension/retraction arm tension with
screw
E
using hex key
13
.
E
13
TIP:
CAUTION:
Avoid potential personal injury or property damage!
DO NOT remove screws
E
, only turn enough for
slight adjustment.
