Step 3A: Attach Ceiling Plate to Adjustment Bracket - Flat Ceilings
NOTE:
If the projector is being mounted in an area where it must be lower from the ceiling, such as areas with vaulted
or cathedral ceilings, proceed directly to Step 3B - Attach Ceiling Plate to Adjustment Bracket using Extension
Pipe and NPT Adapter - Vaulted or Cathedral Ceilings.
Place the Ceiling Plate (
C
) over the Adjustment Bracket (
D
), lining up the holes in both the Ceiling Plate and the Adjustment
Bracket as shown in Diagram 3A; then, using the two Cap Screws (
I
) secure the Adjustment Bracket to the Ceiling Plate.
Diagram 3A
I
I
D
C
Step 3B: Attach Ceiling Plate to Adjustment Bracket using Extension Pipe and NPT Adapter - Vaulted or Cathedral
Ceilings
Place the Ceiling Plate (
C
) over the NPT Adapter (
E
), lining up the holes in both the Ceiling Plate and the NPT Adapter as
shown in Diagram 3B.
Using the Allen Key (
V
) and the two Cap Screws (
I
), secure the Ceiling Plate (
C
) to the NPT Adapter (
E
).
NOTE:
Set Screw (J) is shorter than Set Screw (N).
NOTE:
When using the NPT Extension Pipe (F), the Set Screw (N) must point either toward or away from the screen. If a
longer NPT Extension Pipe is required, custom lengths may be purchased from your local hardware store.
Thread the NPT Extension (
F
)
into the NPT Adapter (
E
) and secure it with the Set Screw (
J
) as shown in Diagram 3B.
Thread the Adjustment Bracket (
D
) onto the NPT Extension (
F
); then, using Set Screw (
N
), secure the Adjustment Bracket
(
D
) to the NPT extension (
F
) as shown in Diagram 3B.
Diagram 3B
E
C
I
I
F
D
N
J
