background image

Sanus Systems

  2221 Hwy 36 West, St Paul, MN  55113  USA • (6901-100130 <03>)

USA Customer Service 1-800-359-5520 • www.sanus.com

FFSF1A

001480.eps
FPS10 - Full Assembly

Do not use this product for any purpose not explicitly specified by Sanus Systems. 

Improper installation or use may cause personal injury and/or property damage. If 

you do not understand these instructions, or if you have doubts about the safety of 

the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable 

for injury or damage caused by incorrect installation or use.

CAUTION

This product contains small items that could be a choking hazard if swallowed. 

Keep these items away from young children!

WARNING

Thank you for choosing the Sanus Systems FFSF1A flat panel foundation 
mount.  The Sanus Systems FFSF1A flat panel foundation mount is 
designed to support a flat panel monitor weighing up to 22 kg (50 lbs). The 
lower shelf supports additional equipment weighing up to 11 kg (25 lbs). 
Hardware for multiple mounting configurations is included.

OPT

Hardware and procedures for multiple mounting configurations are 

included. When you see this symbol, choose the correct configuration to 

suit your needs. Not all hardware included will be used.

Содержание Sanus Flat Panel AV Foundations FFSF1A








Отзывы: