background image

2

Does your audio-visual component weigh 

more

 than 45 lb (20.5 kg) including accessories?

No — Perfect!

Yes — This mount is NOT compatible. Visit accents.sanus.com or call 1-800-359-5520 to fi nd a compatible mount.

45 lb 

(20.5

 

kg)

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

3 mm 

 (1/8 in.)

Ready to begin?

Please read through these instructions completely to be sure you’re comfortable with this easy install process. 
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact 
Customer Service at 1-800-359-5520.

Do you have all of the tools needed?

Before getting started, let’s make sure this product is perfect for you!

1

2

3

4

What is your wall made of?

Unsure?

?

Perfect!

Call 1-800-359-5520

Drywall with 
wood studs

 

CAUTION: 

Avoid potential personal injuries and property damage! 

 

This product is not designed for use on brick, concrete, concrete block, or steel stud walls 

 

The wall must be capable of supporting fi ve times the weight of the speaker and mount combined

 

Do not use this product for any purpose not explicitly specifi ed by manufacturer

 

Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

8 mm 

 (5/16 in.)

11 mm 

 (7/16 in.)

Содержание SANA1A





















Отзывы: