12
Installation
Power
Supply
A correctly installed, earthed socket is required for the electrical sup-
ply. The supply must have a fuse rating of at least
13 Amps. If the
socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance
from the mains (e.g. a fused spur).
Before initial start-up, refer to the appliance rating plate to ascertain
if supply voltage and current values correspond with those of the
mains at the installation location.
e.g.: AC
220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
The mains cable may only be changed by a qualified electrician or
competent person. If your appliance needs repairing, please contact
your local Service Force Centre.
☞
10.
Place the small square on the guide
again and fix it with the screws sup-
plied.
Should the
alignment of the furniture
door be necessary, use the clearance of
slots.
At the end of this procedure, it is neces-
sary to check if the door of the furnitu-
re closes properly.
11.
Fix cover (
Hd) on the small square (Hb)
until it clips into place.
PR168
Hb
PR167/1
Hd
Hb
Downloaded from Fridge-Manual.com Manuals
