Santerno SINUS PENTA S41, Руководство по сборке

Страница: 7 / 24

PARALLEL-CONNECTED
SINUS PENTA MODELS ASSEMBLY
INSTRUCTIONS
7/ 24
2. DELIVERY CHECK
The following kits will be delivered based on the drive model you ordered:
Drive
Kit components
Drive size Drive model Master drive First slave drive Last slave drive
Number of flat cables
for signal connections
S43 0523 0260 Master Not fitted 0260 Last Slave 1
S53
0599 0313 Master Not fitted 0313 Last Slave 1
0749 0367 Master Not fitted 0367 Last Slave 1
0832 0402 Master Not fitted 0402 Last Slave 1
S55
0850 0313 Master 0313 First Slave 0313 Last Slave 2
0965 0367 Master 0367 First Slave 0367 Last Slave 2
1129 0402 Master 0402 First Slave 0402 Last Slave 2
S44 0459
0259 Master Not fitted 0259 Last Slave
1
S54
0526 0290 Master
Not fitted
0290 Last Slave 1
0600 0314 Master
Not fitted
0314 Last Slave 1
0750 0368 Master
Not fitted
0368 Last Slave 1
0828
0401 Master Not fitted 0401 Last Slave
1
S56
0960
0368 Master 0368 First Slave 0368 Last Slave
2
1128 0401 Master 0401 First Slave 0401 Last Slave 2
Table 3: Components of the kit to assemble a drive composed of parallel connected elements
NOTE Flat cables are inside the slave drives (see section 4.1.4).
Make sure that the equipment is not damaged and it complies with the equipment you ordered by referring to
its nameplate given below. Contact the supplier if the equipment is damaged. If the equipment does not
comply with the one you ordered, please contact the supplier as soon as possible.
If the equipment is stored before being started, make sure that acceptable environmental requirements are
met (see SINUS PENTA
– Installation Guide). The equipment warranty covers any manufacturing defect.
The manufacturer has no responsibility for possible damages due to the equipment transportation or
unpacking. The manufacturer is not responsible for possible damages or faults caused by improper and
irrational uses; wrong installation; improper conditions of temperature, humidity, or the use of corrosive
substances. The manufacturer is not responsible for possible faults due to the equipment operation at values
exceeding the equipment ratings and is not responsible for consequential and accidental damages.