0 3
0 4
Place the trim parts against the assigned wall location. Make sure that the roller is leveled and the roller
post positions are correct. Leave 5” to 5-1/4” space between the roller posts for the rollers. Mark the
roller post flange positions and remove the trims.
1.
Using the mounting hardware position as a reference, mark the screw hole positions in the center of the
post flange mark on the wall.
INSTALLING ON WOODEN SURFACE
For wooden surface, the mounting posts can be
secured by screwing the screws directly into the wall.
INSTALLING ONTO DRYWALL SURFACE
Using a drill, pre-drill holes for the anchors. Insert the
anchors into the wall. The mounting posts can be
secured by screwing the screws into the anchors.
INSTALLING ONTO A SOLID SURFACE
Measure the dimensions carefully. Using a drill,
pre-drill the holes. Secure the mounting posts by
screwing the screws into the wall.
2.
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Using the Allen key provided, loosen the roller posts’ set screws. Slip the left roller post onto the left
mounting hardware post. Align the roller post and secure it by tightening the set screw.
3.
Insert the rollers with the spring onto the secured roller post. Slip the right roller post onto the right
mounting hardware post. Insert the right side of the rollers into the right roller post. Align the roller post
and tighten the set screw firmly.
4.
Check both roller posts to make sure they are firmly secured. If not, tighten the set screws with the
Allen key.
5.
5” ~ 5 ”
WALL
1
4
