Santec OTF-920 страница 54 Скачать руководство пользователя

Страница: 54 / 56

OPTICAL TUNABLE FILTER OTF-920

12-1

Warranty

This product is warranted by Santec Corporation of Japan against defect in material or workmanship for

a period of one year from the date of delivery. In the event that a defect occurs during the warranty

period, Santec Corporation of Japan will repair this product within a reasonable period of time after

notification, free of parts and labor charges, provided that (a) the defective unit is returned to Santec

Corporation of Japan, if required, or a specified Santec repair facility; (b) all shipping/customs costs to

Japan are paid by the owner of the defective product; (c) the defective unit has not been damaged by

power failures or power surges, fire, water, pest or rodent infestation, an act of war, or any other act of

nature; and (d) the user has followed the instructions in the operation manual.

Any unauthorized modification, repair, or attempt to repair will render this warranty VOID. Santec will

not be responsible for the product when the seals have been broken or damaged.

This warranty is effective only for the original purchaser of this product and is NOT transferable.

All other expressed warranties are disclaimed and all implied warranties for this product, including the

warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of

one year from the date of delivery. In no event shall Santec Corporation of Japan nor any subsidiary of

Santec nor any distributor of Santec’s products be liable to the customer for any damages, including lost

profits, or other incidental or consequential damages arising out of the use or inability to use this

product.

All requests for repair or service under this warranty must be made as soon as possible after the defect

has been noticed and must be directed to the original seller of the product, whether a distributor of

Santec’s products, a subsidiary of Santec Corporation, or Santec Corporation of Japan.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание OTF-920

























































Результаты поиска

Содержание OTF-920

Отзывы:

Похожие инструкции для OTF-920

Бренды по названию

Популярные бренды

Santec OTF-920, Руководство по эксплуатации

Результаты поиска

Содержание OTF-920

Отзывы:

Похожие инструкции для OTF-920

Бренды по названию

Популярные бренды