Thread the diverter knob through the sleeve onto the valve
-
0 3
T r i m
TRIM PLATE & PLATE COVER
Fit sleeve onto valve until it bottoms out.
Place foam strip around the inner edge of the shower plate.
Press the shower plate against the wall.
Screw the 2 plate screws through the plate holes and onto the
valve’s screw holes. Tighten both screws firmly.
Fit the plate cover over the sleeve and press it all the way into
the trim plate.
-
-
-
-
-
DIVERTER
Thread the diverter sleeve onto the valve
-
HANDLE
Insert the handle onto the valve stem. Turn the handle
clockwise until it reaches the end. Reposition the handle to
Using the provided Allen key, insert the set screw onto the
handle, then press the handle against the valve’s stem tighten
firmly.
Adjust the height of the handle if it is scraping against the
shower plate.
Insert the plug into the handle set screw hole.
-
-
-
-
Plate cover
Handle
Set screw
Allen key
Plug
Trim plate
Sleeve
Finished wall
Plate screws
Trim plate
C OLD
WARM
WARMER
HOT
Sleeve
Handle
Sleeve
Diverter
knob
Diverter
Sleeve
Diverter
knob
Diverter
Sleeve
