0 3
HANDLE TRIMS ARE READY FOR SIMPLE DROP-IN INSTALLATION.
DO NOT DISASSEMBLE.
H a n d l e
Handle Installation
Remove the valve body mounting hardware from the
valve body.
Make sure the handle with the “cold” blue label is
installed at the right side of the spout (looking from front)
and the handle with the “hot” red label at the left side of
the spout.
Apply a ring of silicone caulking around the handle hole
on the sink or counter top (do not use plumber’s putty
which can damage the
fi
nish of your faucet).
Slip the valve body’s
fl
exible hoses from the top of the sink or counter through the appropriate hole
next to the spout.
Rubber washer
Fiber washer
Brass lock nut
A
Align the handle lever properly with respect to the spout
(make sure the respective handle is in its “OFF” position)
From under the basin or counter, hand tighten the brass
lock nut and
fi
ber washer to the valve body against the
counter.
B
SANTEC
SANTEC
