The measurements shown are for reference only. Products and specifications shown are subject to change without notice.
www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681
2/
3
INSTALLATION INSTRUCTIONS
TRIM INSTALLATION
- Place the shower plate on the all thread.
- Screw the handle escutcheon with the Flange washer onto the all
thread.
Press them firmly against the plate and mark the position.
- Remove the handle trim assembly and all th
r
ead and cut off the
excess thread.
-Inset the broach extension onto the valve.
- Insert the Handle onto the broach extension. Measure the excess between
the handle and the
trim plate. Take off the handle and cut the excess stem.
- Reinsert the handle onto the stem.
- Place the Trim Plate Grommet onto the designated hole for the
Diverter Rod on the Trim Plate.
- Screw the Diverter Knob onto the Diverter Rod.
All Thread
Lock Nut
Lock Plate
S
T
Trim Plate Grommet
Diverter Rod
Trim Plate
Handle Trim Assembly
Diverter Knob
Broach Extension
S
T
COLD
HOT
FLANGE WASHER
6
3
4
2
11
5
8
7
9
1
10
New
New
New
New
New
PB-3950
Pessured Balanced w/ Diverter (Valid after Jan 2010)
12
13
PM-8 Kit Extension, 20K Broach
PM-9 Kit Extension, 16K Broach
PM-113X DIverter Extension
(Plated)
ITEM
NO.
PART NUMBER
DESCRIPTION
QTY.
1 TE025
(prior to Jan 2010 - TE010)
Cartridge
1
2 TE-015
Valve Cover
1
3 TE013
Limit Stop
1
4 TE014
Limit Stop
1
5 TE011
Screw
4
6
PM-963
(
prior to
Jan 2010 PM-009
N/A
)
Brass Lock Plate
1
7 PM-964 (new)
Mud Guard Holder
1
8 PB-3950-4
Screw
2
9 Mud Guard (not a spare part)
Mud Guard
1
10 Valve Body (not a spare part)
Valve Body
1
11 Diverter Body (not a spare part)
Diverter Body
1
12 PM-1092
Extension
1
13 PB-002/TE060/TE050 (see picture
below
Diverter Cartridge
1
13
TE050
TE060
PB-002
