
The measurements shown are for reference only. Products and specifications shown are subject to change without notice.
www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681
2/4
2c-
IF INSTALLING ON A SOLID/HARD SURFACE
- Measure the dimension carefully.
- Using a drill, pre-drill the holes.
- Secure the mounting hardware post by screwing the
screws into the wall.
HARD SURFACE
3- Using the Allen key provided, loosen the roller posts’ set screws.
Slip the left roller post with the washer onto the left mounting hardware post
Align the roller post and secure it by tightening the set screw.
Screw the hardware post adapter then, screw the post to the flange.
4- Insert the rollers with the spring onto the secured roller post.
Slip the right roller post with the washer onto the right mounting hardware post.
Insert the right side of the rollers into the right roller post.
Align the roller post and tighten the set screw firmly
.
5- Check both roller posts to make sure they are firmly secured.
If not, tighten the set screws with the Allen key.
.