Santak CASTLE 200KS, Руководство пользователя

Страница: 65 / 124

E. Disconnect the loads connected to the battery before removing
terminals from the battery.
4. Do not expose the battery to fire to avoid the risks of explosion that may
result in personal injury.
5. Non- professionals shall not open or disassemble the battery as electrolytes
in the battery contain strong acid and other dangerous substances which may
cause damage to skin and eyes. Please clean with water immediately and
seek medical assistance if the electrolytes come in contact with human skin.
6. Do not connect the battery positive and negative poles as it may cause short
circuit. Over current protection device is needed to avoid risks of burns or
electric shock.
Maintenance
1. The working environment and storage method of UPS can affect its service
life and reliability. Do not use your UPS in any of the following environments
where:
A. the temperature and humidity are outside the required ranges, i.e.0-
40
°
C and 0-95% humidity;
B. your UPS is at high risks of vibration and collision;
C. there are metal shavings, corrosive materials, salt and flammable
gases.
2. If you plan to leave your UPS idle for a long time, please store it in dry
conditions with an ambient temperature ranging between -25-55
°
C. Before
you start up your UPS, please keep it in an environment where the ambient
temperature is at or above 0
°
C for 2 hours or longer.
3. Keep the air inlets and outlets clear for proper ventilation. Poor ventilation will
cause the temperature inside your UPS to rise, shortening the service life of
the components and that of your UPS.
4. The battery should be charged at least once every three months if it is left
idle and stored in an environment with a room temperature, or at least once
every two months if left idle in a high temperature environment; each charge
should take more than10 hours; do not discharge with no loads connected or
discharge for more than 14 hours continuously.