SBIG ST-8300 Manual
11. After booting the camera Windows will bring up another copy of the
Wizard
. The ST-8300 actually uses
two drivers
. One to
boot
the
camera and one to
talk to it
after it’s booted. We now need to walk
Windows
through installing the second driver.
12. Repeat steps 8 and 9, again telling the
FNHW
to not check for updates
and to install automatically. At this point windows will show you the
Select the best match
page:
13. Select the
oem
file not the
sbig
file (the second item above) by clicking
on it then click the
Next
button.
14. Windows will grind one last time copying the
SBIG USB Camera
driver then show you the
Completing the Found New Hardware
Wizard
page.
Click the
Finish
button and
pat your
self on the back
. You’re done!
If you ever doubt that the camera is actually connected you can open the
Device Manager
from the
Hardware
tab of the
System
control panel and
expand the
Universal Serial Bus controllers
section. You should see a
SBIG USB Camera
listed there:
While you’ve got the
System
Control Panel open, if you want to restore the
Windows Driver Signing security check, click the
Hardware
tab, click the
Driver Signing
button and select:
If Windows can not automatically find the drivers , tell it to Install from a
Specific Location and then browse to the folder:
C:\Program Files\SBIG\Driver Checker\SBIG Drivers
6
Содержание ST-8300C
Страница 48: ...SBIG ST 8300 Manual 45...
