background image

15

ENGLISH

Starting setup

The Auto Setup menu appears the first time you 

turn on the TV, and assists you to specify the 

Air/Cable setting, and program your channels 

automatically.
IMPORTANT: Make sure that the antenna or cable 

TV system connection is made!

1

To turn on the TV, touch   (

POWER

) (POWER 

indicator on the front of the unit changes blue. 

It may take approx. 10 seconds for a picture to 

appear on screen.). The Auto Setup function 

begins.

Auto Setup

:Adjust

:Select

Signal Type

Cable

Automatic Search

Start

2

Press 

 or 

 to select “Cable” or “Air”.

3

Press 

 or 

 to select “Automatic Search”, then 

press 

 or 

ENTER

4

“Auto Setup” will begin. After the Auto Setup 

is completed, the TV channel appears on the 

screen.

Depending on the reception condition, it may 

take up to 30 minutes to complete memorizing 

digital cable channels. Please allow the 

process to complete without interruption.

NOTE:

If you press 

EXIT 

in the process of “Auto Setup”, 

the Auto Setup stops and changes to the normal 

screen.
When you make a menu selection, your changes 

occur immediately. You do not have to press 

EXIT 

to 

see your changes.

TV operation

1

To turn on the TV, touch   (

POWER

).

(POWER indicator on the front of the unit 

changes blue. It may take approx. 10 seconds for 

a picture to appear on screen.)

2

Adjust the volume level by pressing 

VOL +

 or 

 . 

The volume level will be indicated on the screen 

by green bars. As the volume level increases, so 

do the number of bars. If the volume decreases, 

the number of green bars also decreases.

3

Set the Signal Type option to the appropriate 

position (see “Air/Cable selection” on page 18).

4

Press the 

Direct Channel Selection (0

-

9, 

)

 

buttons to select the channel.

(If you press only channel number, channel 

selection will be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: 

Press 1-9 as needed. Example, to 

select channel 2, press 

2

, then press 

ENTER

.

10-99: 

Press the 2 digits in order. Example, 

to select channel 12, press 

1

2

, then 

press 

ENTER

.

100-135:  Press the 3 digits in order. Example, to 

select channel 120, press 

1

2

0

, then 

press 

ENTER

.

TO SELECT DIGITAL CHANNELS

Press the first 1-3 digits, then press the 

 

button, 

followed by the remaining number.

Example, to select channel 15-1, press 

1

,

 5

,

 

1

then press 

ENTER

.

If a channel is selected with only audio content, 

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital 

signal, “Digital channel signal strength is low” 

will be displayed on the screen.

  The same program may be available on either 

an analog channel or a digital channel. You may 

choose to watch either format.

If a channel is selected to which you have not 

subscribed, “Digital channel is encrypted” will 

be displayed on the screen.

VHF/UHF/CABLE CHANNELS

Air

Cable

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) 

(W)

37-59 (AA) 

(WW)

60-85 (AAA) 

(ZZZ)

86-94 (86) 

(94)

95-99 (A-5) 

(A-1)

100-135 (100) 

(135)

01 (4A)

NOTE:

If a channel with no broadcast is selected, the 

sound will automatically be muted.

It may take a few seconds for a digital channel 

picture to appear on screen after being selected.

To select the video input source

To view a signal from another device connected 

to your TV, such as a VCR player, press

 INPUT 

SELECT

, then press 

 or 

 or corresponding 

Number buttons (0

-

5)

, then press 

ENTER

. You can 

select TV, Video, Component, HDMI1, HDMI2 or PC 

depending on which input jacks you used to connect 

your devices.

Input Select

0.TV

1.Video

2.Component

3.HDMI1
4.HDMI2
5.PC

[0-5]:Select

CH 

 

 

Press and release 

CH

 

 /

 

. The channel 

automatically stops at the next channel set into 

memory.

For proper operation, before selecting channels, they 

should be set into the memory. See “Memorizing 

channels” on page 18.

3GJ0621A_En.indd   15

3GJ0621A_En.indd   15

3/3/11   9:36:13 AM

3/3/11   9:36:13 AM

Содержание SLED2282




























Отзывы: