Sansui SJX32HB-2CAF, Руководство пользователя

Страница: 5 / 23

COMPONENT (YCbCr/YPbPr) DVD INPUT: -
1. Connect the component outputs (YCbCr / YPbPr) of DVD player to the
component (YPbPr) input of the TV.
2. Connect audio outputs (L/R) of a DVD player to the audio input YPbPr.
3. Press the PLAY button on the DVD player.
AV INPUT: - 1.Connect the composite VIDEO output of player to AV1.
2. Connect audio outputs (L/R) of a player to the
audio input AV in.
3. Press the PLAY button on the Player.
Note : Selecting a Source
Press TV/AV key on remote or SOURCE key on front panel keypad. A source OSD will appear to select a
source press OK/Right or Left key on the remote or VOL + key from front panel. Press TV/AV key or source
key repeatedly to change and select source. Up/Down key on the remote or CH+/- on front panel
can be used to change sources.
ANT IN AV OUT ANT IN
AV OUT
L1in R1in V1 in
CD/DVD Player
L IN 1 R IN 1
YPbPr
V IN 1
HDMI
VGA
Audio in
AV OUT: -
This connection is used for connecting the TV/AV,
signal from TV SET 1 to TV SET 2.
R L VIDEO
ANT IN
AV OUT
ANTENNA CONNECTION: -
Connect Antenna cable to the ANT IN Socket on rear of the TV. For Good
operation of the set, good signal is required. In the strong signal area, an
indoor antenna could be used, otherwise an outdoor antenna should be used
Note: - The aerial cable should not be bundled to the power cord.
YPbPr INPUT
AV INPUT
MULTIMEDIA: -
Connect / Insert standard USB and select
Multimedia source on source OSD by pressing TV/AV key.
Press OK / Right key on remote, connected USB is listed,
press OK to enter in selected USB Multimedia. Similarly front
panel keys CH+/- and VOL+ can be
operated as Up/Down
and OK/Right keys on remote respectively.
HDMI
USB
VGA INPUT: - 1. Connect the VGA cable from the monitor
output socket of the PC to the VGA IN socket of the TV.
2. Connect the audio cable from the PC to the VGA Audio
IN socket of the set.
3. Switch on the PC and PC screen appears on the TV set.
The set can be operated as PC monitor.
Note: - A. If the set is cold, there may be a small flicker
when the set is switched ON. This is normal, there is
nothing wrong with the set.
B. Some dot defects may appear on the screen, like Red/
Green/Blue spots. However, this will have no impact or
effect on the TV/Monitor performance.
HDMI INPUT: -
1. Connect the HDMI(High Definition Multimedia Interface) cable from the DVD HDMI
Output socket to the HDMI socket of the TV.
2. Set the HDMI mode in DVD Player (Refer User Manual of DVD Player).
Note: - TV can receive the Video and Audio signal simultaneously by using HDMI cable.
VGA INPUT
HDMI INPUT
NOTE: - CH +/ - keys on Remote are represented by CH+/CH- on the TV set.
VOL+/VOL- keys on remote are represented by VOL+/VOL- on the TV set.
CH