Sansui LEDTVSKQ48FH, Руководство пользователя

Страница: 14 / 25

TV OPERATION
-11-
1.PICTURE MENU
P
IC
T
U
R
E
Picture Mode This function is used to select the preset picture settings. (Standard/Mild/User/Dynamic)
Contrast
Brightness
Color
Sharpness
Tint
These settings are used to adjust the Contrast (0-100), Brightness (0-100),
Color (0-100), Sharpness (0-100), and Tint (0-100) values for fine adjustments of the picture.
NOTE: Tint is enabled for NTSC channels only.
Color Temp. Use this option to select and change color temperature.
Aspect Ratio
Select the picture size:Auto
、
4:3
、
16:9
、
Zoom
、
Panorama. Under different channels,
optional scaling mode is different
。
Blue Screen This function is used to ON/OFF the blue back in no Signal condition.
Noise
Reduction
The DNR (Off/Low/Middle/High) reduce the noise by applying temporal and spatial noise
reduction filters to Video data.
S
c
r
e
e
n
Auto Adjust
Auto setting allows the PC screen of TV to self adjust. This automatically sets the Horizontal
position
、
Vertica- position, Phase and Size.
Horizontal
Pos.Vertical Pos.
If picture is not Ok with auto setting then adjust Horizontal position(0-100) / Vertical
position (0-100) manually to adjust the desired picture settings.
Size
、
Phase Adjust the phase (0-100) and size(0-100) to remove or reduce picture noise.
Note : 1) The screen menu will be enabled for PC source only.
2.SOUND MENU
S
O
U
N
D
Sound Mode This function is used to select the preset sound modes(User, Standard, Music, Movie,Sports).
EQ The Equilizer 120Hz, 500Hz, 1.5KHz, 5KHz, 10KHz, (0-100) can be changed by other user.
Treble The treble function is used to vary the treble level from 0 - 100.
Balance User can select the left/right speaker intensity by changing balance (-50 - +50).
Volume
The main speaker volume can be adjusted by varying this volume bar (0-100).
Auto Volume
This function is used to for automatic adjustment of volume level(On/Off).
Bass
The bass function is used to vary the bass level from 0 - 100.