Sansui HDLCD5050 Скачать руководство пользователя страница 5

EN

Notes when mounting the LCD TV on a wall

If the unit is to be mounted on the wall, contact the retailer where 

you purchased the LCD TV for advice, and have the equipment 

professionally installed. Incomplete or improper installation may 

cause injury to you, and/or damage to the LCD TV.

Bracket holes: To attach a wall mounting bracket (not supplied) attach 

where indicated in the drawing right.

This manufacturer recommends professional installation.

Utilize an appropriate bracket and fasteners, sufficient to 

accommodate the size and weight of the unit.

Assure the wall to which the unit is to be mounted will safely support 

the size and weight of the unit, using the bracket and fasteners you 

have selected.

Keep cords and cables connected to this flat panel display out of 

reach of children.

To hang the television on a wall, remove these screws and then 

remove a stand. Before performing work spread cushioning over the 

base area to lay the TV on.

CONDENSATION

Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm 

room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. 

To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure 

that the room temperature rises gradually.

Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In 

such cases, change the location of the unit.

HOW TO HANDLE THE LCD PANEL

Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.

If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause 

skin inflammation.

If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your 

eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

Possible Adverse Effects on LCD Panel:

 If a fixed (non-moving) pattern remains on the LCD Panel for 

long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but 

permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your 

LCD Panel on for long periods of time while it is displaying the following formats or images:

Fixed images, such as stock tickers, video game patterns, TV station logos, and websites.

Special formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on 

a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a 

widescreen (16:9) display (black bars on left and right sides of screen).

The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any 

responsibility for these symptoms.

LCD Panels are manufactured using an extremely high level of precision technology, however sometimes 

parts of the screen may be missing picture elements or have luminous spots.

This is not a sign of a malfunction.

Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some 

equipment placed too near this unit may cause interference.

Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless 

headphones.

SAFETY PRECAUTIONS

The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. 

Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 4 inches 

(10 cm) free space around the entire unit.

Bracket holes

4 inches

4 inches

Screws

IMPORTANT SAFETY INSTRUCTIONS

J3LQ0121A_EN.indd   5

J3LQ0121A_EN.indd   5

3/14/12   4:36:36 PM

3/14/12   4:36:36 PM

Содержание HDLCD5050




























Отзывы: