background image

PACK CONTENTS

  1 x pre-assembled base unit
  1 x main panel with dispenser bracket attached
  1 x dispenser with key to open lid
  1 x 500ml sanitiser
  4 x AA batteries               
  1 x fittings bag containing:

  4 x bolts
  4 x nuts
  4 x white nut caps
  1 x allen key

Floor Units

ASSEMBLY INSTRUCTIONS:
1.  Open the large flat box containing the  

front/side panel, and remove the base unit 

from the other smaller box.

2.  Stand the base unit on its rubber feet, and fold 

up the flaps on the side to 90° (do not fold  

them back down once folded up to 90°).

3.  Carefully stand front panel upright, and fold  

the triangular shaped sides so they are 90° to  

the front (do not fold them back flat once  

folded to 90°).

4.  Insert the 4 bolts through the 4 holes on the 

outside of the side panel, so they align with 

the holes in the base unit.

5.  Place the nuts on the bolts and tighten using  

the tool provided on the bolt and the white  

cap on the nut.

6.  Insert 4 x AA batteries into battery 

compartment on bottom of dispenser.

7.  Take dispenser, remove lid using white key, 

remove lid, fill with sanitiser GEL and attach  

to bracket on the stand.

8.  Please follow detailed instructions for the 

dispenser overleaf.

To order more SanStand products or if you have 

any questions, please contact us today:

 www.sanstand.co.uk

 [email protected]

  0845 519 5442

Отзывы: