Sans Digial TowerSTOR TS25CT
Sans Digital TowerSTOR TS25CT User Manual
31
Chapter 5 Additional Information
5.1 How to Change the USB/1394 IO Interface Board to eSATA
IO Interface Board
NOTE:
Prepare the eSATA IO Kit. Disconnect the host, power off the RAID
subsystem, and remove the USB or IEEE 1394 cable from the USB or 1394b port.
Contents of the eSATA IO Kit:
•
One (1) eSATA IO Interface Board
•
One (1) eSATA cable
Steps:
1.
Prepare the screw handle that is shipped with the RAID subsystem.
2.
Remove 2 screws from the USB/1394 IO interface board.
3.
Insert the screw handle into the middle hole of the USB/1394 IO interface board
and tighten the screw handle.
4.
Carefully pull the screw handle to remove the USB/1394 IO interface board.
5.
Insert the eSATA IO interface board into the IO interface slot. Take note of the
proper position of the IO interface board. If inserted in the wrong position, it will
not attach to the IO interface.
6.
Tighten the two screws that were removed before.
