Sans Digital Towerraid 6G series, Подробное руководство

Страница: 14 / 50

14
5.4 Creating RAID Arrays
Initializing Disks:
Before creating a RAID array, the disks must be initialized. Disk initialization writes necessary RAID
configuration information to the hard disks. Select the Initialize command from the toolbar, and press
Enter key.
Highlight the target disks using the arrow keys, then press the Enter key. A numeral will be displayed
before each selected disk. Once all target disks have been selected, press ESC key. The utility will display a
warning, and ask you to press Y (yes) to initialize, or N (no) to cancel. Once initialized, these disks can be
used to create RAID arrays. These disks will be displayed as “Initialized” (under Status).
Warning: Initialization will destroy all pre ‐ existing data on the selected hard disks. Only initialize
disks that do not contain critical data.
Create Arrays:
Select Create from the toolbar and press Enter key.
1. Use the arrow keys to select the RAID level and press Enter key.
2. Use the arrow keys to highlight the Array Name option and press Enter key. The array name dialogue