www.sansdigital.com
|
info
@
sansdigital.com
|
phone 800 980 1988
|
fax 626 322 3878
Figure 3
Hardware Connection Instructions
1. Power off all devices.
2. Connect the host connection cables. For mini-SAS models (AR212X6(R), AR316X6(R) and AR424X6(R)) connect
the SAS cables to the SAS HBA on the server. For Fibre Channel models (AR212F8(R), AR316F8(R) and
AR424F8(R)), connect the SFP+ modules and LC to LC cables to the Fibre Channel HBA on server, or connect to
the Fibre switches.
3. Connect the LAN cable to the local network. Make sure it is on the same network of the host computer/server.
Web based management can reach as long as they are on the same network.
4. Connect the power cable. Please make sure connect each redundant power supply with the power cables. The use
of UPS, uninterrupted power supply, is higher recommended.
5, Connect AccuSTOR Expansion JBOD system if desire. Please refer to below diagrams for connections.
Expansion Connection
16Bays
Fibre RAID
16bays
JBOD
16bays
JBOD
16bays
JBOD
16bays
JBOD
