Sanrio Hello Kitty KT2215, Руководство пользователя

Страница: 19 / 35

PUTTING THE UNIT ON A PROPER SURFACE
When you turn on your television set for the first time, be sure
to place it on a solid stable, surface.
To avoid danger, do not expose the TV to water, or a heat
source
(i.e. lamp, candle, radiator).
Do not obstruct the ventilation grid at the rear and be sure to
leave sufficient gaps around the unit.
TURNING THE TV ON FOR THE FIRST TIME
After you have initially connected your TV antenna or cable,
press POWER button to turn the television ON.
A screen will display asking you to run a Channel Auto Scan
to search and receive available local digital channels.
It is here where you will select antenna options and run
Channel Auto Scan.
Channels will then be stored in the TV tuner.
Press the MENU button on the remote control.
Using the
/ buttons, scroll to highlight channel mode.
Press the button to highlight AIR/CABLE.
SOURCE SELECT
1. Press the SOURCE button on the remote control.
2. Use the or button to select the options: TV, AV, Component,
HDMI1, HDMI2, PC and Media.
3. Select any of them using the ENTER button and the screen will change
to your desired source.
NOTE:
Before attempting to watch TV, please make sure all necessary cables and
devices are connected.
If the unit cannot detect a valid video signal on the selected input source, it
will return to standby mode automatically in 15 minutes for energy saving.
18