Sanrio HELLO KITTY KT2025, Руководство пользователя

Страница: 9 / 12

8
CD OPERATION
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to read all commercial CDs. It will also read
self-compiled CD-R/CD-RW discs, but it may take up to 10 seconds for the actual playback to
begin. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the
compatibility of the CD compilation software. The manufacturer is not responsible for the playback
quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
PLAY MODE
1. Slide the FUNCTION SWITCH to the
“AUX/CD” position. The LED DISPLAY will light.
2. Open the CD DOOR, load a CD with the label side facing upward and then close the CD
door. A few seconds later the total number of tracks on the CD will appear on the LED display.
3. Press the PLAY/PAUSE BUTTON to start playing the CD from the first track. The
PLAY/PAUSE Indicator will light steadily.
4. While playing, press the BUTTON once to pause, the PLAY/PAUSE Indicator will flash.
Press the BUTTON again to resume playing.
5. Adjust the VOLUME CONTROL to the desired volume level.
6. Press STOP
■ BUTTON to stop playing.
7. To turn off the CD player, slide the FUNCTION SWI
TCH to “OFF” position. The LED
DISPLAY and Power Indicator will go off.
NOTE: If skipping occurs during CD play, try turning the volume down.
Do not open the CD DOOR when a CD is playing.
REPEAT MODE
Repeat 1
When the REPEAT BUTTON is pressed once, the REPEAT INDICATOR will light and blink
continuously. The current track will be repeated until it is interrupted.
Repeat All
When the REPEAT BUTTON is pressed twice, the REPEAT INDICATOR will light steadily. The
whole disc will be played continuously.
To Cancel the Repeat Function: Press the REPEAT BUTTON until the repeat indicator goes
off.
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the SKIP/Search Forward or SKIP/Search Backward
BUTTON to go to the next track or go back to the beginning of the current track.
2. During Play mode or Pause mode, press and hold the or BUTTON to search within
the current track with audible high speed playback.
PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1. Press the PROGRAM BUTTON once. Both Program Number
“01” and the PROGRAM
INDICATOR will flash.
2. Press the SKIP/Search Forward or SKIP/Search Backward BUTTON to select the
track to be programmed.
3. Press the PROGRAM BUTTON again to store the selection. The Program Number will
advance to
“02” and flash to prompt for the next input.
4. You may repeat steps #2 to #3 above to program up to 20 tracks. As soon as you have