SanRex CALPOTE UG Series, Инструкция по эксплуатации

Страница: 41 / 97

41
Phase control Intermittent cycle
control
Continuous cycle
control
Feedback
control
Available Available Not available
Responsiveness High speed Middle speed Low speed
Harmonics May occur Can be reduced
Flickering None May occur May occur
(May be reduced with
the delay function)
Phase control Intermittent cycle control Continuous cycle control

F101: Temperature controller type
Select the temperature controller type.
Code Function name Setting range Increment Unit
Default
value
Changeable
during
operation
F2_P
Priority of the
temperature
controller signal
(P)
0: Control terminal
block input
0 ✗
F2_H
Priority of the
upper limit signal
(H)
1: Panel – – 0 ✗
F2_L
Priority of the
lower point
signal (L)
2: Communication 0 ✗
F2_F
Priority of the
gradient signal
(F)
0 ✗
Output voltage
Output cycles
(effective value)
Output cycles
(effective value)
Interval