ENGLISH
– ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH
7/
13
Step 1:
Make sure to level the bottom board of the cabin.
Install the back wall with the bottom board and
adjust it. One of the installer right the back wall
and mare sure it is vertically
Step 2:
Put the left side wall on the left
of the bottom board and use the sunk screw
(5×70) to install it with the the back wall.
Then install the electricity box after finish the
installation of the side
Attention
：
Please reference the attached pictures to make sure that the mounting will not affect the appearance
while mounting
Step 3: I
nstall the leg heater as pic 3
（
then install the bench frame
）
