SANO NEO LIFTKAR SAL UNI, Инструкция по эксплуатации, Страница: 11 / 24

NEO Liftkar SAL I 11
0 ~ 10 % BLINKING OFF OFF OFF OFF
10 ~ 23 % LIGHT BLINKING OFF OFF OFF
23 ~ 35 % LIGHT LIGHT OFF OFF OFF
35 ~ 48 % LIGHT LIGHT BLINKING OFF OFF
48 ~ 60 % LIGHT LIGHT LIGHT OFF OFF
60 ~ 70 % LIGHT LIGHT LIGHT BLINKING OFF
70 ~ 80 % LIGHT LIGHT LIGHT LIGHT OFF
80 ~ 90 % LIGHT LIGHT LIGHT LIGHT BLINKING
90 ~ 100 % LIGHT LIGHT LIGHT LIGHT LIGHT
2.8 ASCEND BUTTON IN UPPER HANDLE
This button is only active in the ascent mode and switches the lifting mechanism on and off.
2.9 SAFETY FLAP
To start tilting a load, it may be necessary to use your foot to assist in tilting. The axle of the conventional sack
truck is normally used for this purpose. With the LIFTKAR SAL, the swing arm with the support wheels, a wheel,
or the drive unit may be used to support by foot. The safety flap is installed to prevent your foot getting jammed
in by the swing arm. If you press onto the lower part of the flap with your foot all functions will be stopped.
SAFETY INSTRUCTIONS:
You avoid all risk if you switch on only after tilting the load.
2.10 SWITCHING OFF
Battery power is removed:
By removing the battery
Pressing the ON/OFF switch for longer than 3 seconds.
Automatically after 10 minutes
The removal of the battery provides a higher degree of safety than switching off with the timer
cut-out, as the ON / OFF button may be touched inadvertently.