SANO LIFTKAR PTR, Инструкция по эксплуатации

Страница: 23 / 32

23
LIFTKAR® PTR
|
(4.4.1) MOVING ON LEVEL SURFACES
In order to move the wheelchair on the tracked
stairclimber or to turn the combination on landings,
push the handle unit
slightly downwards (figure 1) .
This raises the stairclimber tracks so that the tracked
stairclimber can be shifted on the rear left-hand and
right-hand side wheel units.
(4) USING THE TRACKED STAIRCLIMBER ON LEVEL SURFACES
1
(4.4.2) BASE UNIT FUNCTIONS
The following controls are located on the rear side of
the base unit:
Combined ON/OFF - UP/DOWN switch
Keyswitch
Speed selector switch
It is possible to operate the base unit without the
handle unit. In order to use this function, it is
necessary that the retention lever is in the lower limit
position
(figure 2b) . This mode of operation is provided
exclusively for loading the base unit and for service
activities.
The base unit is operated using the ON/OFF button.
After switching on, the base unit is automatically set
to Move UP mode. Pressing the ON/OFF button again
switches the unit to the Move DOWN mode. Pressing
the ON/OFF button for a longer period switches the
unit off.
Use the speed selector switch to choose between one of three speed settings.
2a
2b