Liftkar HD I 19
If the battery pack is not fully charged, or it looses its charge suddenly, not only will the speed of
the LIFTKAR be slower, but its capacity is reduced as well. This means that overload may be
displayed even with a relatively light load. See section
4.2.1
.
6.1 CHARGER UNIT
The battery charger supplied is extremely powerful. An LED display gives
a clear indication of charging status. The charge indicator gives you an
idea whether the battery pack is fully charged or not. It is worth checking
that the battery pack is fully charged before using the Liftkar.
The charge status is displayed as follows by a LED:
If the LED is lit continuous red the battery pack is being charged.
If the LED is lit continuous green the battery pack is fully charged. The charger can be left connected to the
batteries after full charge (green light), without harming the batteries. The charger uses minimum power in
this stand-by mode, (after battery is fully charged), maintains the batteries at full charge and extends battery
life. This is accomplished with electronic circuitry that controls and regulates the amount of charging current
that is sent from the charger to the battery being charged.
6.1.1 TECHNICAL DATA
Mains voltage supply (50/60 Hz, 0,7A): 100-240 V AC
Nominal rating (input): 24 W
Charging voltage: 24 V DC
Theoretical charging current: 1,0
Protection class: IPX4
Safety approval: UL, cUL, CE
6.1.2 SAFETY GUIDELINES
Please note the following:
Protect against damp
Only charge in a well ventilated room
Do not pull the plug out of the socket by its cord
Do not operate charger with damaged cord or plug - replace immediately!
